|  The famous Pujian pass in central China, our 
		test track.   A 3,300ft rise winding 4 miles straight up. The Montana 
		will easily climb this peak in 30mins with 320 lb rider on board.  
		Tested and proven endurance that no other scooter can come close to. 
  I took this photo about two thirds the way 
		up the pass. What an exhilarating and spectacular ride. You must visit 
		the factory and do this ride one day. I weigh 80kgs and we put an extra 
		65kg in ballast on board. When we arrived at the base deep in the valley 
		I thought if we got 200 metres up this mountain we would doing be better 
		than any scooter I had ridden before. Its that steep. The photo does not 
		give a true indication of how steep it really is. I hit full throttle at 
		the bottom of the valley marked in red and the Montana went straight to 
		the top in 30 minutes at an average speed of almost 12 kph. !!  We 
		loaded the Montana into the van, took it to the bottom and did it again 
		15 minutes later. Nothing overheated, nothing stopped, nothing broke. 
		Perfection. Just a true test of the remarkable engineering skills of 
		Lotus Blake.  How's it done you ask. Read on.
 |  | 
	
		| 
			
				|  | Up till now performance as an 
				average of performance if a large scooter did  1.2 amps/ Mph/ 
				hour this was good.  That is to say a large scooter doing 
				12kph on flat ground is using 22 amps per Hour. Many scooters 
				are far worse than this. The latest Montana has set a new record 
				of .5amps/Mph/hour.  To carry the same load at 8mph the 
				Montana is using 8 amps per Hour. This means batteries last 
				longer, the scooter goes further particularly when the batteries 
				are older and there is less wear and tear. Truly Advanced 
				Technology |  |  |  | 
	
		| This is the most advanced motor and 
		transaxle assembly ever conceived and built for an electric scooter. The 
		motors are state of the art. High powered new material  world leading 
		Rare earth magnets with latest technology windings, laminates and 
		glues. The light weight gear case encloses precision powdered sintered 
		compressed gears. The highest quality Japanese bearings and seals are 
		combined with the latest technology in the very best synthetic 
		lubricant. Small purpose built Accent precision drive couplings finish 
		the drive train to the wheels. This is something to be proud of. 8 years 
		in development and endurance tested under load for 2,000 hours without a 
		brush change. Expensive technology but the outcome is well worth it. 
		This is not an adapted water pump gearbox. It really delivers smooth 
		efficient power like never before. |  |